Get old asphalt looking as good as new with just 1 coat
This product is a bitumen based surface dressing that dries to a black finish with a low sheen. Great for car parks, drives, footpaths and roads. Check out Watco Asphalt Paint if a paint finish is required.
| Properties | Single application, easily applied, covers old stains, upgrades drab asphalt surfaces |
| Suitable for | Old asphalt/tarmac |
| Finish | Low sheen |
| Interior or Exterior | Exterior |
| Primer required | No primer required |
| Composition | Single pack, solvent based bitumen |
| Coverage | 5-10m² per 5L |
| Recommended number of coats | 1 |
| Curing time (at 10°C) | 5 hours |
| Minimum application temperature | 5°C |
Surfaces should be dry and free of any loose material. Moss etc. should be removed by scraping and/or jet washing and the surface left to dry thoroughly.
The product should be applied by roller in one coat. Avoid flooding the surface since this could lead to some temporary softening of the asphalt and extend the drying time of the coating, apply no more than 1.5mm thick. A brush may be used for edges, but again avoid applying too thickly. Small pits and fissures can be filled with a stiff mortar consisting of dry sand and the product. Pits and fissures should be primed with the product before trowelling in the mortar.
