Available in White only.

Watco Damp Proof Paint is ideal for basements or any area where there is a damp problem. Applied as two coats, the first coat primes, the second provides a damp proof, wipe clean finish which will resist mildew growth.

Prevents water seepage through cement, masonry, concrete block walls and basement floor slabs

Resists up to 2 bar of water pressure - twice the strength of latex waterproofers

Fast drying- recoatable in 4 hours

Can be applied to dry or damp surfaces

Provides an attractive, white easily cleaned surface

Watco Damp Proof Paint can be over coated after 14 days if desired, but this will reduce its mould resistance.

Coverage approx. 8 – 10m² per 5 litres per coat.

Surface Preparation

Water leaks and cracks should be patched with a suitable hydraulic cement plugging compound and allowed to dry thoroughly before applying Watco Damp Proof Paint. Watco Damp Proof Paint may be applied over a sound layer of Watco Waterproof Coating.


Application

Do not thin. Stir well before use. Apply two coats by short pile roller or, preferably, brush, working the first coat well into the surface. Keep to the recommended coverage rates. Allow the first coat to dry for at least 4 hours before applying the second. Inspect the completed job for pinholes etc and reapply where necessary. Provide adequate ventilation in areas such as cellars and basements when applying.